|
|
T - Open Hopper
Pump
Group- T type 펌프는 흐르지 않는 고점성의 슬러지등을 이송하는 펌프입니다.
슬러지, 탈수케잌등을 먼거리에 이송하는 펌프로 입구는 프렌지대신 Hopper등으로
제작되어 있습니다.
사용유량 : 50ℓ/h ~ 500㎥/h
사용압력 : ~ 36kg/㎠ 까지
Seepex는 풍부한 경헙을 바탕으로 설계합니다.
When Things Get Really Thick
seepex pumps of product group T are used
for high-consistency material with low degree of intrinsic
flowability or none at all. For these pumping products, the
suction lift capability of a standard pump of product group
N is no longer sufficient to suck them into
pipings. For this reason, pumps of product group T
are equipped with a feed hopper and facilities forsafe product
feeding. It is successfully used in almost all branches of
industry to pump viscous to airtight products. |
|
|
|
|
|
|
|
|
 |
|
|
|
T
��� Open Hopper Pump |
|
 |
|
Flow rate
| 50 l/h - 500 m³/h | 0.220 USGPM - 2,200 USGPM |
|
|
|
Pressure
| up to 36 bar | 540 PSI |
|
|
|
PDF
상세설명보기 |
|
|
|
|
|
| |
Advantages and
Characteristics
- Pump with feed hopper and conveyor screw
- Pitch and diameter of the conveyor screw is adapted
to the operating conditions for optimum product
feed
- Optimum solutions for various viscosities and
characteristics of the conveying medium
- Numerous ranges, optionally available in block
design or with free shaft ends
- Service-friendly due to plug-in connections between
rotating unit and drive
|
|
|
|
|
|
|
|
|
|
|
|
Range BTQ
- For conveying medium to highly viscous products
with a low degree of flowability
- Conveying capacities: 50 l/h - 100 m³/h
0.22 USGPM - 440 USGPM
- Pressures: up to 24 bar | 360 PSI
|
|
|
|
|
|
|
|
|
Range BT
- For pumping highly viscous products with
a low degree of flowability.
- Conveying capacities: 100 l/h - 300 m³/h
0.44 USGPM - 1,320 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
Range BTM
- Developed especially for processing fruit
and vegetables
- Conveying capacities: 0.25 m³/h - 130
m³/h
1.1 USGPM - 572 USGPM
- Pressures: up to 24 bar | 360 PSI
|
|
|
|
|
|
|
|
|
Range BTE
- For pumping highly viscous to airtight products
that do not tend to bridging
- Conveying capacities: 0.5 m³/h - 100
m³/h
2.2 USGPM - 440 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
Range BTI
- For pumping highly viscous to airtight products
that tend to form bridges
- Bridge breaker with two counter running
rotating paddle shafts and a separate drive
- Conveying capacities: 100 l/h - 130 m³/h
0.44 USGPM - 572 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
Range BTH
- For pumping highly viscous to airtight and
shear-sensitive products that tend to form
bridges
- Separately driven ribbon screw rotating
concentrically and on the edges
- Conveying capacities: 0.5 m³/h - 130
m³/h
2.2 USGPM - 572 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
Range BTHE
- For pumping highly viscous to airtight products
that tend to form bridges
- Ribbon screw rotating concentrically and
on the edges
- Conveying capacities: 0.5 m³/h - 130
m³/h
2.2 USGPM - 572 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
Range BTES
- For pumping highly viscous to airtight products
from silo systems.
- Conveying capacities: 0.5 m³/h - 130
m³/h
2.2 USGPM - 572 USGPM
- Pressures: up to 24 bar | 360 PSI
|
|
|
|
|
|
|
|
|
Range BTEI
- For pumping highly viscous to airtight products
that tend to form bridges
- Bridge breaker/mixing device with rotating
paddle shaft and a separate drive
- Conveying capacities: 0.5 m³/h - 100
m³/h
2.2 USGPM - 440 USGPM
- Pressures: up to 36 bar | 540 PSI
|
|
|
|
|
|
|
|
|
|
|
